Latest mud logging service Tenders | Government mud logging service Tenders

Central Government / Public Sector

CTN :40311367

05 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : tender for supply of restriction orifice for p25 project at iocl panipat refinery --field-applied coal tar enamel pipe coating systems: application, performance, and quality control , coatings and linings over concrete for chemical immersion and containment service , corrosion control of offshore structures by protective coatings , control of external corrosion on underground or submerged metallic piping systems liquid-applied internal protective coatings for oilfield production equipment , extruded polyolefin resin coating systems with soft adhesives for underground or submerged pipe , discontinuity (holiday) testing of new protective coatings on conductive substrates holiday detection of fusion-bonded epoxy external pipeline coatings of 250 to 760 um (10 to 30 mils) , measurement of protective coating electrical conductance on underground pipelines offshore platform ballast water tank coating system evaluation , test procedures for organic-based conductive coating anodes for use on concrete structures , aboveground survey techniques for the evaluation of underground pipeline coating condition , laboratory methods for the evaluation of protective coatings and lining materials on metallic substrates in immersion service , evaluation of internal plastic coatings for corrosion control of tubular goods in an aqueous flowing environment , evaluation of internal plastic coatings for corrosion control of tubular goods by autoclave testing , holiday detection of internal tubular coatings of 250 to 760m (10 to 30 mils) dry film thickness , exterior protective coatings for seawater immersion service

Central Government/Public Sector

CTN :40467467

17 Jun, 2025 12.92 Crore

Haldia - West Bengal

Tender For design, construction, supply, testing, commissioning of water treatment system with back wash water recycling system for improvement of the quality of water supplied to residential zone at haldia township under hdc including operation and maintenance

State Government

CTN :40472969

10 Jun, 2025 10.34 Lacs

Bengaluru - Karnataka

Tender For tender for the procurement of lab consumables 2025-26 - xylene(2.5 ltr can), well plates 96(0.1 ml), van gieson staining kit(ready to use kit), trizol(100 ml), tae buffer(100ml), sodium hypochlorite solution(05 ltr), small sterlization bin(good quality small size ), rna purification kit from formalin fixed paraffin embedded blocks for pcr(with 50 minelute spin columns (min elution volume of 14-30 microl) silica technology), ppe kit(good quality), ph testing meter(good quality), petroleum jelly (500 gms bottle) bottle, paraffin wax(500mg) bottle, nitric acid(hno3)(500 ml) bottle, museum jars(5ltrs) bottle, museum jars(50ml) bottle, micropipettes 10-100ul(1000 piece per box/pkt), micropipettes 100-1000ul(std quality), micropipettes 0.5-10ul.., michels medium(500 ml), massons trichrome stain kit(ready to use kit), lancet (200 in each packets) lancet, infrared thermal sensor(good quality) thermal, hydrogen peroxide 3% ip(100 ml bottle) bottle, gluteraldehyde solution(5 ltr can), glasscover slips(22mmx50mm)(10 gms of 20pkt/box) cover slips, glass rod(good quality), glass funnel(good quality), formaldehyde(5 ltr can), ethanol (2.5 ltr) bottle, eppendrorf tubes(1ml 1000 pcs ), eosin yellow powder (water soluble)(25 gms) bottle, enamel trays(medium and large size), dpx mountant(250ml) bottle, dna extraction kit(spin columns), dna & rna quantification kit(std quality), centrifuge tube 5 ml stands(good quality), centrifuge tube (1.5ml) stands(good quality), cdna conversion kit(1000 reaction), blood vacutainer tubes( purple) vacutainer, blood vacutainer tubes(red ) vacutainer, base mould rings for embedding of tissues in paraffin wax(stainless steel (4cmx2.7cm)) bottle, automatic hematology analyzer l.h(200 ml lyse (councell penta 5)) bottle, automatic hematology analyzer diluents(20 litres (councell penta 5)), automatic hematology analyzer differential(500 ml lyse (councell penta 5)) bottle, automatic hematology analyzer cleanser(50 ml probe (councell penta 5)) bottle

Central Government/Public Sector

CTN :40458357

12 Jun, 2025 6.55 Lacs

Dakshina Kannada - Karnataka

Tender For contract for stack monitoring, ambient air quality testing, drinking water testing and sewage water testing at pellet plant unit, kiocl limited, panambur, mangaluru and lakya dam overflow water testing at kudremukh.

corporations/Associations/Others

CTN :40431688

05 Jun, 2025 8.34 Lacs

East Godavari - Andhra Pradesh

Tender For supply delivery of portable multiple water quality meter for testing ph, turbidity, iron, chlorine, nirate, sulface, conuctivity tds, do, temperature and glass ware at hww in rmc.

CTN :40423805

31 May, 2025 NA

Darjeeling - West Bengal

Tender For construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter & battery

CTN :39038241

06 Jun, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20nos), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, batterycharger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injectormulti hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineers square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, angle

Corporations/Associations/Others

CTN :40406887

30 May, 2025 2.16 Lacs

Chikkaballapur - Karnataka

Tender For water quality testing of borewells and jakkalamadagu drinking water in cmc chikkaballapur limits annually

State Government

CTN :40398381

13 Jun, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint. # th

Central Government/Public Sector

CTN :40442573

12 Jun, 2025 6.55 Lacs

Dakshina Kannada - Karnataka

Tender For providing of custom bid for services - contract for stack monitoring, ambient air quality testing, drinking water testing & sewage water testing at pellet plant unit, kiocl limited, panambur, mangaluru and lakya dam overflow water testing at kudremukh

Mud Logging Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors